Included with differential and axle bush tools, this is a comprehensive kit to renew the ball joints and bearings in the rear wheel carrier, longitudinal arms and rear axle, etc. All tools included are of highest quality and designed for long life in daily workshop use.
- Silent bearing tool set for BMW, 16 pcs
- Allows the renewing of rubber bushings the suspension
- Includes various print pieces, stem and pods
- Suitable for vehicles from BMW, 1 Series models, for example, E81 , E87; 3 Series E36, E46, E83, E90, E91, E92, E93; 5 Series models E60, E61, E63; 6 Series models , E64 , E38; 7 Series models, E65, E66, E67; 8 Series models E31, E85 Z4 models, E86, and Mini Cooper S R53 model
- A 225 mm feed rod for actuating the Silent bearing inserts with thread M12 x 1.5 mm long, at the end of the spindle with thread M12 x 1.5 mm short, with hex drive wrench size 8 mm
- Motion thread on the spindle and Axialrillenlager on the pressure piece cause high train and pressure performance with minimum effort (torque)
- A spindle nut with thread M12 x 1.5 mm, with hexagonal drive wrench size 19 mm
- A compression nut with Axialrillenlage, internal thread M12 x 1.5 mm, with hexagonal drive wrench size 24 mm
- Training and retraction pressure plots for extracting and inserting the ball joint on wheel carrier rear
- A support sleeve outer diameter 70.0 mm, inner diameter 57.5 mm, side slits
- A support plate, with hole diameter 12.5 mm, outer diameter 70.0 mm, trimmed with outer diameter 57.0 mm, height 12.2 mm
- A pull-out pressure sleeve, with internal thread M12 x 1.5 mm, outer diameter 51.0 mm, inner diameter 49.7 mm, height 35.2 mm
- An intake pressure sleeve, with internal thread M12 x 1.5 mm, outer diameter 58.0 mm, inner diameter 47.0 mm, height 43.1 mm
- Training and retraction apparatus for extracting and inserting the ball joint and the rubber mount in the trailing arm
- A pull-out spacer sleeve with a bore diameter of 12.5 mm, outer diameter 55.0 mm, inner diameter 46.0 mm, height 72.3 mm
- A pull sleeve , with hole diameter 12.5 mm, outer diameter 45.0 mm, inner diameter 36.0 mm, height 30.1 mm
- An intake spacer sleeve, with internal thread M12 x 1.5 mm, outer diameter 55.1 mm, inner diameter 46.5 mm, height 30.1 mm, with lateral phase
- Training and retraction pressure plots for extracting and inserting the rubber mount in the rear axle down, rear gear screw
- A spacer sleeve , with hole diameter 12.5 mm, outer diameter 58.0 mm, inner diameter 47.0 mm, height 60.5 mm
- A pressure element, with internal thread M12 x 1.5 mm, outer diameter 49.9 mm, inner diameter 32.0 mm, height 25.3 mm
- Training and retraction pressure plots for extracting and inserting the rubber mounts in the rear transmission mount, front and rear
- A sleeve with a bore diameter of 12.5 mm, outer diameter 65.0 mm, inner diameter 50.3 mm, height 70.1 mm
- A pull-out pressure piece, with internal thread M12 x 1.5 mm, outer diameter 48.0 mm, inner diameter 32.0 mm, height 20.1 mm
- An intake pressure piece , with internal thread M12 x 1.5 mm, outer diameter 65.0 mm, inner diameter 32.0 mm, height 20.3 mm
- A draw- plate , with hole diameter 12.5 mm, outer diameter 50.2 mm, trimmed with outer diameter 46.0 mm, height 12.1 mm
- Supplied in blow molded case
- Tool in the highest-quality execution
- Long life in daily workshop use
It is a professional tool for commercial or DIY use. The kit is ideal assistance for you to remove and install ball joints, bushes and bearings for numerous BMW models from 1 Series to 8 Series. This silent bearings tool set is designed for long life in daily workshop use and categorized into industrial grade. All tools are sorted it in in a blow molded case for easy storage and transportation.
