Digital DDS Dual-channel Signal Generator

Arbitrary waveform DDS signal generator from MHS-5200A series is a multi-functional signal generator with high precision and high performance. It adopts large scale of FPGA integrated circuits, high-speed MCU microprocessor and SMT in the inner circuit, which can greatly improve the anti-interference and lifetime of the instrument. The LCD display is divided into two lines: the top line shows the current frequency and the following line displays additional parameters or functions. This instrument is of great advantage in generating signal, scanning waveform, measuring parameters, etc. It's an ideal testing or measuring instrument for electronics engineer, electronic laboratory, teaching and researching.
  
Features:
Can output arbitrary waveforms and conventional function waveforms(sine/triangle/square/sawtooth wave and TTL signal).
All functions are digitally controlled, precise and stable.
Dual-channel output, can work in sync, phase difference is adjustable.
With linear sweep(Max. up to 999s) and logarithmic frequency sweep functions.
Signal of both channels has built-in sophisticated -20dB attenuator in order to reach the minimum amplitude resolution 1mV.
With 120% ~ + 120% DC bias function.
4 TTL output(phase difference is adjustable).
Has a frequency measurement, period measurement, positive and negative pulse width measurement, duty cycle measurements and counting function.
With USB interface, after the connection with PC, the PC can be used to control the instrument.

Specifications:

Project	Parameters
Key Features	Frequency Range	Sine Wave	Normal Modes(Optional): 0.01Hz~6MHz / 0.01Hz~12MHz / 0.01Hz~20MHz / 0.01Hz~25MHz
		Square Wave	0.01Hz~6MHz
		Triangle Wave	0.01Hz~6MHz
		Sawtooth Wave	0.01Hz~6MHz
		Arbitrary Waveform	0.01Hz~6MHz
		TTL Digital Signal Wave	0.01Hz~6MHz
	Output Modulation	Frequency Sweep
	Waveform Types		Sine/Triangle/Square/Lifting Sawtooth Wave, CMOS Digital Signal Wave and Arbitrary Waveform
	Waveform Length		2048Points
	Sampling Rate		200MSa/s
	Waveform Amplitude Resolution		12 Bits
	The Min. Frequency Resolution		10mHz
	Frequency Error		+/-5*10^(-6)
	Frequency Stability		+/-1*10^(-6)
	Amplitude Range(Peak to Peak)		5mVp-p~20Vp-p
	Output Impedance		50Ω(+/-10%)
	Amplitude Resolution		1mVp-p (-20dB Attenuation) 10mVp-p (No Attenuation)
	Offset Range		-120%~120% (The ratio of bias voltage and signal amplitude)
	Bias Resolution		1%
	Phase Range		0~359°
	Phase Resolution		1°
Sine Wave	Harmonic Arrived System		40dBc(<1MHz); 35dBc(1MHz~20MHz)
	Distortion		<0.8%(20Hz~20KHz)
Square Wave	Lifting Along Time		≤20ns
	Overshoot		≤10%
	Duty Cycle Adjustment Range		0%~99.9%
TTL	Lifting Along Time		≤20ns
	Low Level		<0.3V
	High Level		1V~7.5V
Arbitrary Waveform	Quantity		16
	Memory Depth/Group		1KB/16
Scan	Scan Mode		Linear Sweep, Log Sweep
	Scan Time		1s-999s
	Scan Range		It is determined by the sweep parameter settings
External Measurements	Frequency Measuring Range		GATE-TIME=10S 0.1Hz - 60MHz GATE-TIME=1S 1Hz - 60MHz GATE-TIME=0.1S 10Hz - 60MHz GATE-TIME=0.01S 100Hz - 60MHz
	Input Voltage Range		0.5Vp-p~20Vp-p
	Counting Range		0~4294967295
	Counting		Manually
	Positive and Negative Pulse Width Measurement		10ns Resolution, the Max. Measurable 10s
	Periodic Measurement		20ns Resolution, the Max. Measurable 20s
	Duty Cycle Measurement		0.1% Resolution, Measuring Range from 0.1%~99.9%
	Source Selection		1. Ext. IN Input(AC Signal) ; 2. TTL-IN Input(Digital Signal)
Memory	Quantity		10
	Location		M0~M9
Interface	Interface Mode		using USB to Serial Interface
	Communication Rate		57600bps
	Protocol		Using the Command Line, the Agreement Public
Power Supply	DC		MHS5200A DC 5V Power Supply
General
Size	19.5 * 17.5 * 7cm / 7.67 * 6.9 * 2.75in
Weight	542g / 19.12oz
Package Size	24 * 21 * 9.5cm / 9.45 * 8.3 * 3.74in (L * W * H)
Package Weight	986g / 34.78oz

Package List:
1 * Signal Source Generator
1 * USB Cable
1 * CD
1 * TTL Expansion Board
2 * BNC Clips Cable